Slide 1

Slide 2

Slide 3

Slide 4

Slide 5

previous arrow
next arrow

1

STANDARDS

14+ STANDARDS IN VALVES

2

VALVE STEEL GRADES

3000+ VALVESTEEL GRADES

3

END CONNECTIONS

12+ VALVE END CONNECTIONS

Standards

API (American Petroleum Institute), ASME/ANSI, MSS SP (Manufacturers Standardization Society of the Valve and Fittings Industry), BS (British), FCI (Fluid Control Institute), ASTM, DIN (germany), JIS (Japanese), AWWA (American Water Works Association), ISO (international), NF, ISA (International Society of Automation), EEMUA (Engineering Equipment and Materials Users Association), GB (Chinese), etc.

Threading

Classification Based on Function, Operation, Design, Material, Industry or applicaiton, Pressure Rating, Temperature Rating, Flow Characteristic

Plating

End Connections: Flanged, Threaded, Welded, Socket-weld, Screwed, Push-on, Brazed, Soldered, Clamped, Union, Tri-Clamp, Sanitary

Products

Threaded studs, fully threaded studs, tap end studs, double end studs, reduced shank studs, arc weld stud, axle stud, clamping stud, cd weld stud, chemical anchor stud, chemical stud, clinch stud, cylinder head stud, drive studs, engine stud, hex stud, high strength stud, stud nut, stud washer, pull stud, stud bolts, shear stud, weld studs, stud anchors, stud elbow, wheel stud, etc.
Allen, allen cap, allen cap socket head, allen key, csk allen, l-key, anchor, wedge anchor, pin type anchor, bullet anchor, anti-theft, banjo, bent, l-bent anchor, u-bolt, square bent u-bolt, j-bolt, bent tie, bent check, bent hook rail, bent i-bolt, custom special bent, bicycle chain stay, seat piller, chain stay, pinch(for c/b), bucket tooth, button head, carriage, carriage head, exterior carriage, capsule tower, coach, IS 2609 coach, bzp threaded coach, exterior coach, collar, connecting, connecting rod, construction, countersunk, socket countersunk head, coupling, cup head, door, double, double end, double threaded, draw, drop, dummy bar, elevator, elevator bucket, engine mounting, equalizer, euro, expansion, eye, lifting eye, fish, flange, 12 point flange, flat, flat head, flat top socket, flat-topped machine, foundation, eye/i foundation, l/j foundation, bent foundation, rag foundation, lewis foundation, cotter foundation, plate type foundation, friction grip, hammer head, handle expander, hanger, head, heavy duty, heavy truck, hex, hex flange, hex head, hex head machine, hexagon/tap, hexagon head, hexagon socket head, hexagonal socket, hook, hub, i, idler gear, interlocking, j, knurling, lag, latch, lock, locking, lug, machine, masonry, mounting, mushroom, mushroom head square neck, nib, oval sheet metal, pivot, plow, plough, rack, radiator, rag, rawl, ring, rod, rock, roof, roofing, round, round head, round head square neck, round slotted wood, seat, security, segment, self-drilling metal, shackle, shear, shear screws (security snap off screw), shear anchor dome head (sleeve), shear anchor countersunk head, shear anchor dome head (shield), shear button head, shear countersunk, socket shear, slim head shear, shoulder, side cutter, socket, socket head, split, spring, square head, square neck, step, stove, stripper, structural, steel shaker screen, suspension, t, t slot, tap, tapered, tensile, tensioner, threaded, through, timber, toggle, track, u, u-bolt with plate, stainless u-bolt / crown, round u-bolt, heavy u-bolt, square u-bolt with plate, frame u-bolt, antenna mount u-bolt, universal u-bolt, copper u-bolt clamps, suspension u-bolt, truck u-bolt, long u-bolt, valve cover, weld, wheel, wing, wood, etc.
12 point flange nut, 2 way lock nut, acme nut, anchor nut, anti theft nut, axle nut, acorn nut, all metal lock nut, blind nut, blind rivet nut, break away or shear nut, camshaft nut, cap nut, castle nut, hexagonal castle nut, slotted castle nut, collar nut, collet nut, coupling nut, compression nut, crank nut, dome nut, domed cap nut, hexagon domed cap nut, die nut, expansion nut, eye nut, flange nut, flange hex nut, flange serrated nut, foundation nut, frp nut, heavy nut, heavy hex nut, hex nut, hex cap nut, hex coupling nut, hex finish nut, hex flange nut, hex jam nut, hex lock nut, hex machine nut, hex machine nut small pattern, hex machine screw nut, hexagonal nut, hexagon thin nut, insert nut, insert lock nut, j nut, jack nut, jam nut, jaw t-nut, hex jam nut, keps-k lock nut, knurled nut, lifting eye nut, knurled thumb nut, lock nut, lug nut, self-locking nut, nylock nut, open lug nut, nylock jam nut, prevailing torque lock nut (stover), machine nut, mounting nut, machine screw nut, pipe nut, plain nut, plow nut, ring nut, rivet nut, round nut, structural heavy hex nut, sheet metal nut, slotted nut, spring nut, slotted hex nut, square nut, stud nut, square thin nut, taper nut, threaded nut, t-nut, torque nut, tri-groove nut, u nut, union nut, wedge nut, weld nut, hexagon weld nut, wheel nut, square weld nut, wing nut, wheel lock nut, cast wing nut, cold forged wing nut, etc.
Rivet washer, bearing washer, bearing wave washer, bell crank washer, belleville washer, belleville conical washer, bevel washer, square beveled washer, bimetallic washer, bonded washer, c-washer, conical washer, conical spring washer, countersunk washer, crank washer, crescent / curved wave washer, countersunk washer, curved disc spring washer, d-shaped washer, dock washer, dome spring washer, elevator washer, fender washer, fender washer - extra thick, finger spring washer, finishing washer, finishing cup washer, flange washer, flat washer, flat washer - extra thick, flat washer - military standard, flat washer - 900 series, flat round washer, flat retaining washer, flat square washer, hex washer, hexagon washer, lock washer, lock washer - split ring, lock washer - high collar, lock washer - external tooth, lock washer - internal tooth, lead washer, machine washer, mica washer, multi tooth washer, nas washer, neoprene epdm washer, neoprene washer, nitrile rubber washer, ogee washer, plain flat washer, plate washer, round washer, sealing washer, self locking washer, serrated washer, serrated lock washer, overlapping serrated washer, external serrated washer, internal serrated washer, shoulder washer, insulating shoulder washer, spherical washer, split washer, split lock washer, helical / spring lock washer, spring washer, flat section spring washer, square section spring washer, double coil spring washer, square washer, square plate washer, star washer, external star washer, overlapping star washer, internal star washer, structural washer, stud washer, tab washer, internal tab washer, external tab washer, double tab washer, taper washer, torque washer, top hat washer, wave washer, wave spring washer, wedge lock washer, etc.
Adjusting, allen, allen cap, anti theft, twist security shear nuts, multi pin-hex security button head, multi security pin hex drive csk self tapping, pin hex csk machine tamper proof, multi security pin torx drive csk self tapping, anti theft forward security one-way rd head st, km premium security nut, 5-lobe pin security, shears bolts, pin hex security tool bit tamper proof anti theft, forward security one-way round head machine, security pin torx button head machine tamper proof, multi security pin torx drive button head self tapping, pin torx security tool bit tamper proof anti theft, 2h premium security - two hole, pig nose, snake eyes, 2h premiums csk - snake eyes, two hole, pig nose, pin hex security key wrench tamper proof anti theft, multi security pin torx csk tamper proof, bone, cap, button head cap, socket low head cap, socket flange head cap, captive, carriage, cervical bone, cheese head, cheese head allen, chipboard, coach, concrete, countersunk flat head, raised countersunk head, cross, customized, deck, decking, double threaded, dowel, drilled, self-drilling, flange, flat head, flat head self tapping, grub, socket head grub, cone point grub, dog point grub, flat point grub, half dog grub, hammer head,hex, hex socket cap, hex socket countersunk head, hex socket head, hex socket, hex washer head, hex wood, hex head, hex head self drilling, hexagonal, hexagon head, hexagon socket countersunk, hexagon socket head cap, hexagon socket pan head, injection, injection molding, insert, lag, hex lag, locking, self locking, machine, masonry, mdf, miniature, mounting, nail, oval head, pan head, pan head combination, pan head machine, pan, parallel twin, pin, polyaxial, precision, rail, reduction, rigging, rocker arm, rocker arm adjusting, roller, roofing, round head, round head machine, torx rounded head, button head torxs, flanged rounded head, ultra-wide flanged rounded head, extra-wide flanged rounded head, vibration-resistance rounded head, ultra vibration-resistant thread-locking rounded heads, tamper-resistance rounded head, tamper-resistance asymmetrical drive button head, vented rounded head, vented button heads, left-hand threaded rounded head, left-hand threaded button heads, sammys, shaft, set, socket set "grub", slotted set, slotted cheese head, slotted machine, sheet metal, socket, socket cap, socket head, socket head cap, flange button socket, sacral, serrated flange, shoulder, socket head shoulder, single threaded, square head, star head, tapping, self-tapping, threaded, threaded hex, thread cutting, thread forming, thread rolling, top clamp, torque, torx, trim head, truss head, twin, washer head, wing, wood, etc.
Semi-tubular rivet, brake lining rivet, clutch facing rivet, countersunk, disc brake lining rivet, flat head, oval head, truss head, solid/round head rivet, high-strength structural steel rivet, flat/nail head tinners rivet, 78° countersunk, 90° countersunk, 100° countersunk, pan head, modified brazier head, brazier head, round head, aluminum round head, universal head, blind rivet, speed fastening, mate, “t” style, high strength, structural, “q” style, tri-grip, grooved, avex, multi- grip, easy entry, closed end, self-drilling, self-tapping, sealed blind rivet, peeled blind rivet, soft set blind rivet, dome head blind rivet, large head blind rivet, countersunk head blind rivet, oscar rivet, drive rivet, flush rivet, friction-lock rivet, self-piercing rivet, bifurcated rivet, split rivet, closed end pop rivet (sealed), colored rivet, countersunk pop rivet, large flange pop rivet, multi-grip rivet, pop rivet (open end), structural rivet, tri-fold rivet, snap head rivet, pan head rivet, pan head with tapered neck rivet, pan head type I rivet, pan head type II rivet, conical head rivet, countersunk head rivet, mushroom head rivet, counter sunk head 120° rivet, flat counter sunk head 90° rivet, flat counter sunk head 60° rivet, round counter sunk head rivet, round counter sunk head 60° rivet, flat head rivet, ellipsoid head rivet, steeple head rivet, etc.
Internal circlip, internal circlip din 472, heavy duty internal circlip din 472, internal circlip bk type : din 984, tail type internal circlip, external circlip, external circlip din 471, heavy duty external circlip din 471, external circlip ak type : din 983, tail type external circlip, e-clipse type circlip din 6799, tapered-section circlip, increased abutment circlip, star or k - circlip, external circlip lugged, internal circlip lugged, retaining ring, external shaft retaining ring, internal housing retaining ring, constant-section retaining ring, snap ring, internal snap ring, internal snap ring din 7993 part b, external snap ring, external snap ring din 7993 part a, external snap ring din 5417, external snap ring din 5417 b, plain wire ring, special wire ring, round wire ring, steering lock ring, special notching ring, spiral retention ring (spirolox retaining ring), split ring, u type clip, basic types of ring, classic circlip retaining ring, star or k type ring, heavy duty circlip reinforced design, inverted circlip, radial assembly ring, e ring, bowed-e retaining ring, klip ring(poodle ring), low clearance ring (crescent ring), crescent ring c type din 5103, ring for compensation of axial play, bevelled circlip, dished l ring, bewed w ring, self-locking ring, grip ring, va ring for shaft din 5108, vb ring for bore din 5008, push-on fix clip, toothed clip, support washer shim, shims din 988, support washer din 988, etc.
Solid pin, solid dowel pin, roll pin / dowel pin din 1481, internal threaded dowel pin, external threaded dowel pin, stepped dowel pin, spiral-groove dowel pin, pull dowel pin, cylindrical (dowel) or parallel pin, internal threaded cylindrical (dowel) pin, taper dowel pin, precision dowel pin, custom dowel pin, grooved pin, spring dowel pin, spring dowel sleeves (light), spring dowel sleeves (heavy), spring pin (light duty), coiled spring pin, roll / slotted spring pin, wire lock / snapper / safety spring pin, spiral dowel pin, spiral dowel pin din 7343/ din 7344, slotted dowel pin, ejector pin, spring steel safety clip, heavy duty, push-on fix, special wire rings for shafts, clevis pin / hair pin, hairpin cotter, hairpin clip, cotter pin, hitch pin, lynch pin / linch pin, pin assortments, safety pin, taper pin, threaded taper pin, slotted pin, split pin, clinch pin, bullet-nose dowel, bullet-nose pin, clamping pin, cone locator pin, ejector pin, pivot / hinge pin, drive pin, knurled pin, toggle pin, escutcheon pin, etc.
Captive nut inserts, cage nut inserts, clip-on nut inserts, externally-threaded inserts, helical / helicoil inserts, standard / free running inserts, screw locking inserts, tangless screw thread inserts, tanged screw thread inserts, 8-pitch screw thread inserts, oversize & twinserts screw thread inserts, pipe thread inserts, primer free ii coated inserts, self-tapping screw thread inserts, spark plug screw thread inserts, mold-in inserts, type a molded-in inserts, type a threaded inserts closed end, type b molded-in inserts, type b threaded inserts thru hole, type c molded-in inserts, type c threaded inserts closed end, type d molded-in inserts, type d threaded inserts closed end, type d studded molded-in inserts, press fit inserts, type e pressed-in inserts, type e threaded inserts closed end, type f pressed-in inserts, type f threaded inserts open end, potted inserts, thick-wall inserts, thin-wall inserts, slotted-body inserts, wellnut inserts, molly jack or jack nut inserts, riv-float inserts, f-inserts, hex drive thread inserts, type d (flanged) inserts, type e (flush) inserts nut, key locking inserts, knife thread inserts, knurled press inserts, nut inserts, press inserts, self locking inserts, thread inserts kits, thread inserts tool accessories, thread inserts tools, thread repair inserts, ultrasonic inserts, etc.
Concealed head standoffs, keyhole standoffs, blind standoffs, thru-hole standoffs, thin sheet standoffs, threaded standoffs, unthreaded standoffs, snap-top standoffs, grounding standoffs, close to edge standoffs, micro, self-clinching standoffs, hex male/female standoffs, hex female/female standoffs, round male/female standoffs, round female/female standoffs, broaching standoffs, self-clinching standoffs, swage standoffs, round spacers, round swage spacers, hex spacers, etc.

Standards

Various possible API (American Petroleum Institute) Standard of Valves are mentioned below:
API 526: Specification for quality programs 
API 527: Manufacturing, and testing of axial, ball, check, gate, and plug valves
API 528: Fire Test for Valves. 
API 529: Inspection and testing for all valves and is heavily referenced in the industrial sector such as oil and gas industry.
API 591: Flanged and butt – welding – end steel gate and plug valves for refinery use
API 594: This standard specifies the requirements for a series of compact gate, globe, and check valves for petroleum and natural gas industry applications.
API 595: Standard specifies fire type-testing requirements and a fire type-test method for confirming. the pressure-containing capability of a valve under pressure during and after the fire test.
API 597: Refers to specifications for flanged, threaded, and welded ball valves made from metal
API 598: wellhead and Christmas tree equipment for oil and gas production and processing facilities
API 598:  Rubber lined butterfly valves.
API 599:  Seat tightness testing and the maximum acceptable leakage rates for pressure relief valves
API 600: Supplement 1 to API spec 6D (sixteenth edition ) specification for pipeline valves
API 602: This includes requirements for SSSV system design, installation, operation, testing, redress, support activities, documentation, and failur
API 603:  Provides testing procedures and acceptance criteria for evaluating a manufacturer's valves. 
API 604: Wafer-type check valves
API 606: Steel plug valves flanged or butt welding ends
API 607: Ductile iron gate valves flanged ends"
API 608: Compact Steel Gate Valves-Extended Body
API 609: Butterfly valves to 150 PSIG and 150 F
API 621: Provides guidelines for reconditioning heavy wall carbon steel, ferritic alloy, stainless steel, and nickel alloy gate, globe, and check valves for ASME pressure classes up to 2500.
API 6A: Steel gate plug ball and check valves for pipeline service
API 6D: API Specification for wellhead surface safety valves for offshore service
API 6FA: Flanged steel safety relief valves
API 6FC: Commercial seat tightness of safety relief valves with metal – to metal seats
API Q1: API standard for safety relief valve nameplate nomenclature
API SPE14D: Cast – forged Steel plug valves flanged ends
API SPEC6D: Cast iron gate valves flanged ends"
API STD 527: Steel venturi gate valves flanged or butt welding ends
API STD 609: Valve inspection and test
API STD6D: pound light – wall corrosion – resistant gate valves for refinery use

Various possible ASME/ANSI Standard of Valves are mentioned below:
ASME/ANSI B16.34: Valves – flanged, threaded and welding end 
ASME/ANSI B16.5 : Pipe flanges and flanged fittings 
ASME/ANSI B16.10: Face-to-face and end-to-end dimensions of valves 
ASME/ANSI B16.11: Forged fittings, socket-welding and threaded 
ASME/ANSI B16.25: Butt welding ends
ASME/ANSI B16.47: Large diameter steel flanges Note: This specification for flanges larger than 24? replaces MSS SP-44 and API 605 with the design
ASME B31.3: Chemical plant and petroleum refinery piping
ASME B31.1: prescribes requirements for the design, materials, fabrication, erection, examination, testing, inspection, operation, and maintenance of piping systems 
ASME B16.33 : manually operated metallic valves sizes NPS 1/2 through NPS 2
ASME B16.34: Valves Flanged, Threaded and Welding End
ANSI B31.4: Liquid petroleum transportation piping system
ANSI B31.8 : Gas transmission and distribution piping system
ANSI B16.10-86: Face to face and end to end dimesnion of valve
ANSI B16.34-81: Valve-flange connection and butt welding connection
ANSI B16.37-80: Control valve static pressure test
ANSI B16.38-85: Large manual metal gas valve for gas distribution system whose maximum allowable operating pressure does not exceed 1251b£/m2 (8.6bar, gauge pressure)
ANSI B16.40-85: Manual thermoplastic gas shut-off device or valve for gas distribution system
ANSI B16.41-83: Quality requirements for power drive valve components in nuclear power plants
ANSI B16.104-76: Control valve seat leakage
ANSI B146.1-77: Steel flange connection safety relief valve
ANSI C33.83 -72: Used for Safety Standards for Electric Valves in Class A, B, C, D Groups and || Class E, F, G Groups in Hazardous Areas
ANSI N278.1 -75: Standards for functional specifications of automatic and power-driven safety valves
ANSI/FC175 -1-79: Test conditions and test procedures for measuring the electrical performance of electromagnetic valves
ANSI/FC169 -1-77: Pressure rating standards for steam traps
ANSI/UL1121-79: Safety standards for marine through-shell fittings and marine valves
ANSI/ISA-S75.01: Quantitative equation of control valve
ANSI/UL352 - 81: Constant oil level valve standard
ANSI/AP1527 – 78: Conventional seat tightness of safety relief valve with metal seal
ANSI/AWWAC500-86: Water supply and drainage system gate valve
ANSI/AWWAC501- 87: Cast iron water gate
ANSI/AWWAC509 – 80: Resilient valve seat gate valve for water supply and drainage system
ANSI/AWWAC506 – 78: Backflow prevention device a pressure reducing principle type and double check valve type
ANSI/ASTMB462 – 79: Forged or rolled stainless steel, nickel, iron, molybdenum, copper, niobium stabilized alloy (UN-SNoS020) pipe flanges, forged pipe fittings, valves and external parts for corrosion and high-temperature work
ANSI/UL312 – 89: Fire protection device check valve
ANSI/UL1478 – 88: Refractory pump pressure reducing valve
ANSI A126: Grey cast iron parts for valves, flanges and pipe fittings
ANSI A181: Forged or rolled steel flanges and forged pipe fittings, valves and parts for general use
ANSI/ASTM A217M: Specification for martensitic stainless steel and alloy steel castings for high temperature pressure parts
ANSI B1.1: Unified inch thread (UN and UNR thread form)
ANSI B1.5: Trapezoidal thread (ACME)
ANSI B1.8: Short Tooth Trapezoidal Thread (ACME)
ANSI B1.20.1: Pipe thread general purpose
ANSI B1.20.3: Seal pipe thread
ANSI B2.1: Pipe thread (except dry seal thread)
ANSI B16.1: Cast iron pipe flanges and flanged pipe fittings
ANSI B16.5: Flanges and flange accessories
ANSI B16.10: Valve structure length
ANSI B16.11: Socket welding and threaded connection forged pipe fittings
ANSI B16.14: Steel pipe plug, bushing and lock nut (with pipe thread)
ANSI B16.20: Channel steel flange and ring metal gasket
ANSI/AWWA C504: Rubber gasket seal butterfly valve
ANSI/FCI 69-1: Standards for pressure ratings of traps
ANSI/FCI 70-2: Control valve seat leakage
ANSI/FCI 85-1: Trap product testing
ANSI/FCI 87-1: Classification and operating principle of traps
ANSI/FCI 87-2: Standard for power signal of spring template drive control valve
ANSI/FCI 91-1: Control the quality standard of valve sealing
ANSI/UL 132: Safety standards for safety valves for anhydrous ammonia and liquefied petroleum gas
ANSI/UL 144: Safety standards for liquefied petroleum gas pressure regulating valve
ANSI/UL 753: Alarm accessory for automatic water supply control valve for fire-fighting equipment
ANSI/API 527: Seat tightness of safety valve
ANSI/API 608: Butt welding and flange end metal ball valve
ANSI/ASSE 1003: Pressure reducing valve for domestic water supply system
ANSI/ASSE 1046: Thermal expansion pressure reducing valve
ANSI/ASTM F 1508: Specification for angle relief valves for steam, gas and liquid equipment
ANSI T 3.5.14 R1: Hydraulic transmission. Directly controlled valves. Determination of boundary characteristics
ANSI(NFPA)T3.21.4 R2: Pneumatic valve NFPA/T2.6.1 R2-2000 Supplement: Pressure rating of hydraulic components Test fatigue and determine the pressure of hydraulic pneumatic valves with metal shells
ANSI/(NFPA) T 3.21.8: Pneumatic and hydraulic. Measurement of response time. Direct valve control
ANSI Z21.22a Addenda: Safety valve for hot water supply system and automatic gas shut-off system
ANSI Z21.22: Safety valve for hot water supply system and automatic gas shut-off system
ANSI Z 21.22a: Pressure reducing valve and vacuum pressure reducing valve
ANSI Z 21.22b: Pressure reducing valve of hot water supply system
ANSI/ASHRAE 17: Test method for rated capacity of thermostatic refrigerant expansion valve
ANSI/ARI 750: Refrigerant thermostatic expansion valve
ANSI/ISA 75.01.01: Flow equation for size control valve
ANSI/ISA 75.08.01: Face-to-face dimensions of integral flanged ball control valve body (type 125, 150, 250, 300, and 600)
ANSI/ISA 75.08.02: Dimensions between the end faces of flangeless control valves (class 150, 300, and 600)
ANSI/ISA S 75.08.03: Socket welding end and screw end spherical control valve surface to surface size
ANSI/ISA S 75.08.04: Face-to-face dimensions of the butt-welded ball control valve
ANSI/ISA 75.08.05: Face-to-face dimensions of butt-welded ball control valves (types 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA 75.08.06: Face-to-face dimensions of flanged ball control valve bodies (types 900, 1500 and 2500)
ANSI/ISA S 75.08.07: Face-to-face dimension of independent flange spherical control valve
ANSI/ISA S 75.15: Face-to-face dimensions of the butt-welded ball control valve (ANSI grade 150, 300, 600, 900, 1500, 2500)
ANSI/ISA S 75.19.01: Hydrostatic test of control valve
ANSI/IEEE 1290: Guidelines for the application, protection, control and testing of electric control valve motors in nuclear power stations

Various possible MSS SP (Manufacturers Standardization Society of the Valve and Fittings Industry) Standard of Valves are mentioned below:
MSS SP-25: Standard Marking System for Valves, Fittings, Flanges and Unions
MSS SP-55: Visual Method for Evaluation of Surface Irregularities
MSS SP-70: Gray Iron Gate Valves Flanged And Threaded Ends
MSS SP-71: Bolted bonnet, flanged ends. 2 - 24” (50 - 600 mm) class 125. cast iron or 3% nickel iron. standard materials.
MSS SP-79: Socket-Welding-Reducer-Inserts
MSS SP-80: provides a temperature pressure chart for 125, 150, 200, 300 and 350 class bronze valves, covering temperatures from - 20° F. to 550° F.
MSS SP-83: Class 3000 and 6000 Pipe Unions, Socket Welding and Threaded (Carbon Steel, Alloy Steel, Stainless Steels, and Nickel Alloys)
MSS SP-85: This Standard Practice covers gray iron globe and angle valves with flanged and threaded ends. 
MSS SP-42-78: 150L6 flange and welded corrosion-resistant gate valve. Globe valve. Angle valve and check valve
MSS SP-53-80: Quality Standard for Steel Castings of Valves, Flanges, Pipe Fittings and Piping Accessories-Magnetic Particle Inspection Method
MSS SP-54-80: Quality Standard for Steel Castings of Valves, Flanges, Pipe Fittings and Pipe Fittings-Radiographic Test Method
MSS SP-55-85: Quality standards for steel castings of valves, flanges, pipe fittings and their pipe fittings (visual method)
MSS SP-61-77: Pressure test of steel valve
MSS SP-67-76: Butterfly valve
MSS SP-70-76: Cast iron gate valve with flange and threaded end
MSS SP-71-76: Cast iron swing check valve with flange and threaded end
MSS SP-72-76: Ball valve with flange end and welding end
MSS SP-80-74: Bronze gate valves, globe valves, angle valves and check valves
MSS SP-81-81: Stainless steel knife gate valve without bonnet flange connection
MSS SP-82-76: Valve pressure test method
MSS SP-85-76: Flange connection and threaded connection cast iron angle globe valve
MSS SP-86-81: MSS Guidelines for Metric Data of Valve Flanges and Fittings
MSS SP-88-83: Diaphragm valve
MSS SP-91-84: Manual valve operation guide
MSS SP-92-80: MSS Valve User Guide
MSS SP-93-82: Valves, flanges, pipe fittings and other pipeline accessories-steel castings and forgings quality standards-liquid penetration inspection method
MSS SP-94: Ultrasonic inspection method for quality standards of ferritic and martensitic steel castings of valves, flanges, pipe fittings and other pipeline accessories
MSS SP-95: Die forging threaded pipe joints and large pipe plugs
MSS SP-97: Integral reinforced forged branch lead-out pipe fittings-socket welding, threaded and welded ends
MSS SP 108: Cast iron eccentric plug valve with elastic seal
MSS SP-117: Bellows seals for globe valves and gate valves
MSS SP 118: Flange end, flangeless end, threaded end and welded end compact steel globe valve and check valve (for chemical and petroleum refining)
MSS SP-120: Design Requirements for Flexible Graphite Packing System of Lifting Stem (Rising Stem) Steel Valves
MSS SP-125: Spring-loaded center-oriented gray cast iron and ductile iron pipeline check valve
MSS SP-126: Spring-loaded center-oriented steel pipeline check valve
MSS SP-25: Standard marking system for valves, fittings, flanges and unions
MSS SP-55: Quality standard for steel castings for valves, flanges, and fittings, and other piping components – visual method
MSS SP-70: Cast iron gate valves, flanged and threaded ends
MSS SP-71: Cast iron swing check valves, flanged and threaded ends
MSS SP-79: Socket-welding reducer inserts
MSS SP-80: Bronze gate, globe, angle and check valves
MSS SP-83: Class 3000 steel pipe unions, socket-welding and threaded
MSS SP-85: Cast iron globe and angle valves, flanged and threaded ends
MSS SP-6: Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
MSS SP-25: Standard Marking Systems for Valves, Fittings, Flanges, and Unions
MSS SP-42: Class 150 (PN 20) Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt Weld Ends
MSS SP-70: Gray Iron Gate Valves, Flanged and Threaded Ends
MSS SP-71: Gray Iron Swing Check Valves, Flanged and Threaded Ends
MSS SP-72: Ball Valves with Flanged or Butt-welding Ends for General Service
MSS SP-78: Gray Iron Plug Valves, Flanged and Threaded Ends
MSS SP-80: Bronze Gate, Globe, Angle and Check Valves
MSS SP-81: Stainless Steel, Bonnet-less, Flanged, Knife Gate Valves
MSS SP-85: Gray Iron Globe and Angle Valves, Flanged and Threaded Ends
MSS SP-88: Diaphragm Type Valves
MSS SP-105: Instrument Valves for Code Applications
MSS SP-91-84: Guidelines for Manual Operation of Valves
MSS SP-92-80: Valve User Guide 
MSS SP-93-82: Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Liquid Penetrant Examination Method
MSS SP-97: Integrally Reinforced Forged Branch Outlet Fittings: Socket Welding, Threaded, and Buttwelding Ends
MSS SP 108: Resilient-Seated Cast Iron Eccentric Plug Valves
MSS SP-117: Bellows Seals for Globe and Gate Valves
MSS SP 118: Compact Steel Globe & Check Valves - Flanged, Flangeless, Threaded & Welding Ends (Chemical & Petroleum Refinery Service)
MSS SP-120: Flexible Graphite Packing Sealing for Rising Stem Valves
MSS SP-125: Check Valves: Gray Iron and Ductile Iron, In-Line, Spring-Loaded, Center-Guided
MSS SP-126: In-Line, Spring-Assisted, Center-Guided Check Valves (Carbon, Alloy Steel, Stainless Steel, & Nickel Alloys)

Various possible British BS Standard of Valves are mentioned below:
BS EN 12266-1:2012: Specifies requirements for tests, test procedures and acceptance criteria for production testing of industrial valves made of metallic materials
BS EN 16767:2020: The general requirements for metallic check valves, which are forged, cast or fabricated in straight, angle or oblique patter
BS 6364:1984: Specification for valves for cryogenic service
BS EN 593:2017: Industrial valves. Metallic butterfly valves for general purposes
BS EN 1983:2013:  Applies to steel ball valves mainly used for industrial and general purpose applications.
BS EN 1984:2010: Specifies the requirements for steel gate valves that are wrought, cast, or fabricated with end connections flanged, butt welding, socket welding or threaded. 
BS EN ISO 17292:2015: Specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications.
BS 759-1:1984: Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings
BS 1212-1:1990: Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1552:2004: Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1873:1975: Steel globe and globe stop and check valves (flanged and butt welding ends) for the petroleum, petrochemical, and allied industries
BS1953:2000: Copper alloy check valves for general purposes
BS2080:1995: Specification for Face to face, center to face end – to -end and center – to – end dimensions of flanged and butt-welding end steel valves for the petroleum, petrochemical, and allied industries
BS2995:1966: Cast and forged steel wedge gate, globe, check and plug valve, screwed and socket-welding, sizes 2in and smaller for the petroleum industry
BS3948:1965: BS3948:1965
BS4133:1967: Flanged steel parallel slide valves for general purposes
BS 5154:1991: Copper alloy globe stop and check, check and gate valves for general purposes
BS 5159:1982: pecification for cast iron and carbon steel ball valves for general purposes
BS 5351:1990: Steel ball valves for the petroleum petrochemicals and allied industries
BS 5417:1976: Test of general-purpose industrial valves
BS 5793-6:1986: Industrial-Process Control Valves. Specificaton For Mounting Details For Attachment Of Positioners To Control Valve Actuators (British Standard)
BS 6759-3:1995: Specification for safety valves for steam and hot water
BS EN 60534-3-2:2001: Industrial-process control valves. Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
BSI 1414: Steel wedge gate valves (flanged and butt welding ends) for the petroleum, petrochemical, and allied industries
BSI 1868: Steel check valves (flanged and butt welding ends) for the petroleum, petrochemical, and allied industries
BSI 5352: Steel wedge gate, globe and check valves 50 mm and smaller for the petroleum, petrochemical, and allied industries
BS 1123: Specification for safety valves, gauges, and other safety fittings for air receivers and compressed air installations
"BS 1414: ": Specification for steel wedge gate valves ( flanged and butt-welding ends ) for the petroleum, petrochemical, and allied industries
BS 1570: Specification for Flanged and Butt – welding ends steel plug valves for the petroleum industry (excluding well – Head and flow – line val
BS 1735: Specification for Flanged cast iron outside – screw – and – yoke edge gate valves class 125, size 1.5 into 24 in for the petroleum industry
"BS 1868: ": Specification for steel check valves (flanged and butt-welding ends ) for the petroleum, petrochemical, and allied industries
BS 1952: Specification for copper alloy gate valves for general purposes
BS 1968: BS 1968
BS 2060: Copper alloy screw-down stop valves for general purposes
BS 2591 PT.1: British standard glossary for valves and valve parts (for fluids ) part 1. screw-down stop, check, and gate valves
BS 2591 PT.2: British standard glossary for valves and valves parts ( for fluids) part,2 safety valves and relief valves
BS 2591PT.3: British standard glossary for valves and valve parts (for fluids ) part 3, Plug valves and cocks
BS 2591PT.4: British standard glossary for valves and valves (for fluids ) part4, butterfly valves
BS 2591PT.5: BS 2591PT.5
BS 3464: ": Specification for cast iron gate valves for general purposes"
BS 3808: Specification for cast and forged steel flanged, screwed and socket – welding Wedge gate valves (compact design ) sizes 2 in and smaller for the petroleum industry
BS 3948: Specification for cast iron parallel slide valves for general purposes
"BS 3952: ": BS 3952
BS 3961: Specification for cast iron screw-down stop valves and stop and check valves for general purposes
BS 4090: Cast Iron check valves for general purposes
BS 4133: Flanged steel parallel slide valves for general purposes
BS 4312: Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings
BS 4460: ": Steel Ball valves for the petroleum industry"
BS 5146: Specification for inspection and test of steel valves for the petroleum petrochemical and allied industries
BS 5150: Cast iron wedge and double disk gate valves for general purposes
BS 5151: Cast iron gate (parallel slide ) valves for general purposes
BS 5153: Cast Iron check valves for general purposes
BS 5155: ": Cast iron and carbon steel butterfly valves for general purposes"
BS 5156: Screw down diaphragm valves for general purposes
BS 5157: Steel gate (parallel slide ) valves for general purposes
BS 5160: Specification for Flanged steel globe valves, globe stop, check valves and lift type check valves for general purposes
"BS 5351: ": Steel ball valves for the petroleum petrochemicals and allied industries
BS 5417: Test of general-purpose industrial valves
BS 5418: Marking of general-purpose industrial valves
BS 6283-2-1991: Safety and control devices used in hot water systems. Pressure range from 1bar to 10bar temperature relief valve specification
BS 6283-4-1991: Safety and control devices used in hot water systems. Part 4: The maximum supply pressure is 12bar, and the standard size includes DN50 micro tension pressure reducing valve specifications
BS 6364-1984: Low temperature valve
BS 6494-4-1989: The mounting surface of hydraulic valves. Part 4: Specification for clamping dimensions of four-hole assembly exhaust valves, modular valve and directional control valves of 03 and 05 specifications
BS 6683-1985: Valve installation and use
BS 6755-1986: Part 1: Valve test Product pressure test requirements
BS 6755-1987: Part 2: Valve test and fire resistance test requirements
BS 6759-1-1984: Safety valves. Part 1: Specification for safety valves for steam and hot water
BS 6759-2-1984: Safety valves. Part 2: Specification for safety valves for inert gas or compressed air
BS 6759-3-1984: Safety valves. Part 3: Specification for safety valves for working fluids
BS 7438-1991: Specification for spring-loaded steel and copper alloy single-disc compression check valves
BS 7461-1991: Specification for electric automatic gas shut-off valve with flow regulator, closed circuit switch indication, closed position indicator switch or gas flow control
BS/MA 65-76Pt.10: Butterfly valve
BS/MA 65-76Pt.11: Diaphragm valve
BSI 1414: Steel wedge gate valves (flanged and butt welding ends) for the petroleum, petrochemical, and allied industrie
BSI 1868: Steel check valves (flanged and butt welding ends) for the petroleum, petrochemical, and allied industries
BSI 1873: Steel globe and globe stop and check valves (flanged and butt welding ends) for the petroleum, petrochemical, and allied industries
BSI 5352: Steel wedge gate, globe and check valves 50 mm and smaller for the petroleum, petrochemical, and allied industries
BS 5152: Cast iron globe and globe stop and check valves for general purposes
BS 5153: Cast Iron check valves for general purposes
BS 5154: Copper alloy globe stop and check, check and gate valves for general purposes
BS 5155: Cast iron and carbon steel butterfly valves for general purposes
BS 5156: Screw down diaphragm valves for general purposes
BS 5157: Steel gate (parallel slide ) valves for general purposes
BS 5159: Specification for cast iron and carbon steel ball valves for general purposes
BS 5160: Specification for Flanged steel globe valves, globe stop, check valves and lift type check valves for general purposes
BS 5351: Steel ball valves for the petroleum petrochemicals and allied industries
BS 5417: Test of general-purpose industrial valves
BS 5418: Marking of general-purpose industrial valves
BS 1212: Ball valves (Portsmouth type ) excluding floats
BS 1123: Specification for safety valves, gauges, and other safety fittings for air receivers and compressed air installations
BS 1414: Specification for steel wedge gate valves ( flanged and butt-welding ends ) for the petroleum, petrochemical, and allied industries
BS 1552: Control plug cocks for low-pressure gases
BS 1570: Specification for Flanged and Butt – welding ends steel plug valves for the petroleum industry (excluding well – Head and flow – line valves)
BS 1735: Specification for Flanged cast iron outside – screw – and – yoke edge gate valves class 125, size 1.5 into 24 in for the petroleum industry
BS 1868: Specification for steel check valves (flanged and butt-welding ends ) for the petroleum, petrochemical, and allied industries
BS 1873: Specification for Steel globe and globe stop and check valves (flanged and butt-welding ends ) for the petroleum, petrochemical, and allied industries
BS 1952: Specification for copper alloy gate valves for general purposes
BS 1953: Copper alloy check valves for general purposes
BS 1968: Floats for Ball valves ( copper )
BS 2060: Copper alloy screw-down stop valves for general purposes
BS 2080: Specification for Face to face, center to face end – to -end and center – to – end dimensions of flanged and butt-welding end steel valves for the petroleum, petrochemical, and allied industries
BS 2591 PT.1: British standard glossary for valves and valve parts (for fluids ) part 1. screw-down stop, check, and gate valves
BS 2591 PT.2: British standard glossary for valves and valves parts ( for fluids) part,2 safety valves and relief valves
BS 2591PT.3: British standard glossary for valves and valve parts (for fluids ) part 3, Plug valves and cocks
BS 2591PT.4: British standard glossary for valves and valves (for fluids ) part4, butterfly valves
BS 2591PT.5: British standard glossary for valves and valve parts ( for fluids ) part5, Ball valves
BS 2995: Specification for cast and forged steel wedge gate, globe, check and plug valves screwed and socket – Welding sizes 2 in and smaller for the petroleum industry
BS 3464: Specification for cast iron gate valves for general purposes
BS 3808: Specification for cast and forged steel flanged, screwed and socket – welding Wedge gate valves (compact design ) sizes 2 in and smaller for the petroleum industry
BS 3948: Specification for cast iron parallel slide valves for general purposes
BS 3952: Specification for cast iron butterfly valves for general purposes
BS 3961: Specification for cast iron screw-down stop valves and stop and check valves for general purposes
BS 4090: Cast Iron check valves for general purposes
BS 4133: Flanged steel parallel slide valves for general purposes
BS 4312: Flanged steel screw-down stop valves and stop and check valves for general purposes
BS 4460: Steel Ball valves for the petroleum industry

Various possible FCI(Fluid Control Institute) Standard of Valves are mentioned below:
FCI 69-1: Standards for pressure ratings of traps
FCI 70-2: Control valve seat leakage
FCI 85-1: Trap product testing
FCI 87-1: Classification and operating principle of traps
FCI 87-2: Standard for power signal of spring template drive control valve
FCI 91-1: Control the quality standard of valve sealing
FCI 68-2: Procedure in rating flow and pressure characteristic of solenoid valve for liquid service.
FCI 70-1: Standard terminology and definition for filled thermal systems for remote sensing temperature regulators
FCI 75-1: Test conditions and procedures for measuring electrical characteristics of solenoid valves
FCI 82-1: Recommended methods for testing and classifying the water hammer characteristics of electrically operated valves.
FCI 84-1: Metric definition of the valve flow coefficient CV
FCI 91-1: The standard for qualification of control valve stem seals
FCI 68-2: Recommended Procedure in Rating Flow and Pressure Characteristics of Solenoid Valves for Liquid Service
FCI 70-1: Standard Terminology and Definition for Filled Thermal Systems for Remote Sensing Temperature Regulators
FCI 75-1: Test Condiitons and Procedures for Measuring Electrical Characteristics of Solenoid Valves
FCI 82-1: Recommended Methods for Testing and Classifying the Water Hammer Characteristics of Electrically Operated Valves
FCI 84-1: Metric Definition of the Valve Flow Coefficient Cv
FCI 91-1: Standard for Qualification of Control Valve Stem Seals

Various possible American ASTM Standard of Valves are mentioned below:
ASTM F1020-86: Line-Blind valves  for Marine Applications
ANSI/ASTMB462 – 79: Forged or rolled stainless steel, nickel, iron, molybdenum, copper, niobium stabilized alloy (UN-SNoS020) pipe flanges, forged pipe fittings, valves and external parts for corrosion and high-temperature work
ANSI/UL312 – 89: Fire protection device check valve
ANSI/UL1478 – 88: Refractory pump pressure reducing valve
ANSI A126: Grey cast iron parts for valves, flanges and pipe fittings
ANSI A181: Forged or rolled steel flanges and forged pipe fittings, valves and parts for general use
ANSI/ASTM A217M: Specification for martensitic stainless steel and alloy steel castings for high temperature pressure parts
ANSI/ASTM F 1508: Specification for angle relief valves for steam, gas and liquid equipment
ASTM A961/A691M : Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM B61 : Standard Specification for Steam or Valve Bronze Castings
ASTM F1030 : Standard Practice for Selection of Valve Operators
ASTM F1802 : Standard Test Method for Performance Testing of Excess Flow Valves
ASTM F1793 : Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
ASTM F1794 -: Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
ASTM A338: Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650
ASTM A522/A522M-01: Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A694/A694M-03: Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM B763: Standard Specification for Copper Alloy Sand Castings for Valve Application
ASTM B834: Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM C1129: Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
ASTM F885: Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
ASTM F992: Standard Specification for Valve Label Plates
ASTM F1020: Standard Specification for Line-Blind Valves for Marine Applications
ASTM F1030: Standard Practice for Selection of Valve Operators
ASTM F1098: Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24

Various possible German DIN Standard of Valves are mentioned below:
DIN 3230-1974: Technical Conditions of Delivery for Valves; General Requirements
DIN 3230-1977: Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN 3230-1981: Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids.
DIN 3259-1985: Flanged suction strainers with non-return valve
DIN 3352-1979: Gate Valves of Heat-resistant Steel
DIN 3844-1981: Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials
DIN 5589-1990: Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements
DIN 32730-1993: Valves with a safety function for water and steam in heating systems - safety requirements and testing
DIN 86511-1973: Shut-off valves, screwed-bonnet type of gun metal with 25° taper-bushing pipe unions for brazing
": DIN EN 60534-3-2-2002": Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001
DIN 477-6: Gas cylinder valves; test pressures 300 bar and 450 bar, with cylindrical thread for valve stem and gas cylinder neck for breathing apparatus; sizes, threads
DIN 1690-10: Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves
DIN 3202-4: Face-to-face and center-to-face dimensions of valves; Valves with female thread connection
DIN 3266-2: Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors,anti-vacuum valves; testing
DIN 3320: Safety valves; safety shut-off valves; definitions, sizing, marking
DIN 3357-1: Metal ball valves; general requirements and methods of test
DIN 3357-3: Reduced bore steel ball valves
DIN 3357-4: Full bore nonferrous metal ball valves
DIN 3381: Safety devices for gas supply installations operating at working pressures up to 100 bar; pressure relief governors and safety shut-off devices
DIN 3399: Gas low-pressure cut-off valves; safety requirements, testing
DIN 3441-5: Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions
DIN 3442-3: Polypropylene (PP) valves; diaphragm valves; dimensions
DIN 3500: PN 10 piston type gate valves for use in drinking water supply systems
DIN 3512: Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW
DIN 3535-5: Rubber/cork and rubber/cork synthetic fiber based gasket materials for use with gas valves, gas appliances and gas pipe work
DIN 3537-1: Gas stop valves rated for pressures up to 4 bar; requirements and acceptance testing
DIN 86260: Shut off valves for shipboard use, of gun metal, with flanges, DN 15 to 500
DIN 86501: Valves, screwed bonnet type of gun metal with 24i..-connection with port end W according to DIN 3861
DIN 86720: Gate valves flat sided of gun metal with screwed bonnet and flanges, DN 20 to DN 100, PN 16
DIN EN 558-1: Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – PN designated valves
DIN EN 558-2: Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems -Class-designated valves
DIN EN 1092-2: Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
DIN EN 1092-4: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges
DIN5208 – 87: Industrial valves-pressure test of valves
DIN5210-89: Multi-turn valve drive connection
DIN5211 – 89: Partial rotary valve drive connection
DIN6002 – 88: Steel gate valve with bolted bonnet
DIN – 88: Valve fire test requirements
DIN10631 – 91: General-purpose metal butterfly valve

Various possible Japanese JIS Standard of Valves are mentioned below:
JIS-B2001 – 87: Nominal Size And Bore Of Valves
JIS-B2031 – 86: Gray Cast Iron Valves
JIS-B2032 – 87: Wafer type rubber-seated butterfly valves
JIS-B2064 – 84: Butterfly Valves For Water Works
JIS-B2071 – 87: Steel valves
JIS-B2083 – 76:  Valves for Liquefied Petroleum Gas Cylinder.
JIS-B8373 – 81: Pneumatic fluid power -- Solenoid operated valves
JIS-B8414 – 90:  Safety valve for water heater
JIS-B8651 – 89: Test method of proportional solenoid pressure reducing valve
JIS-B8656 – 89: Proportional electromagnetic bypass directional flow control valve
JIS-F7300 – 89: Standards for the use of general valves and cocks
JIS-F7354 – 89: Marine cast iron 5K angle check valve
JIS-F7364 – 89: Marine cast iron 10K gate valve
JIS-F7371 – 88: Marine 5K Bronze Swing Check Valve
JIS-F7373 – 88: Marine 10K cast iron swing check valve
JIS-F7377 – 89: Marine cast iron 16K stop check valve
JIS-F7398 – 89: Ship fuel tank automatically closes the drain valve
JIS-F7399 – 89: Emergency shut-off valve for ship fuel tank
JIS-F7412 – 88: Marine 5K Bronze Pipe Cap-shaped Spiral Non-Return Coupling Cap-shaped Angle Valve
JIS-F7421 – 89: Marine 20K forged steel globe valve
JIS-F7457 – 89: Pneumatically operated remote cut-off device, emergency cut-off valve for ship fuel tank

Various possible AWWA (American Water Works Association) Standard of Valves are mentioned below:
AWWA C500 - 86: Water supply and drainage system gate valve
AWWA C501- 87: Cast iron water gate
AWWA C509 - 80: Resilient valve seat gate valve for water supply and drainage system
AWWA C506 - 78: Backflow prevention device a pressure reducing principle type and double check valve type
AWWA C504: Rubber gasket seal butterfly valve
AWWA - A504 - 80:  Rubber seat butterfly valve.
AWWA - A508 - 82: FOR INSTALLATION OF DUCTILE-IRON WATER MAINS AND THEIR APPURTENANCES
AWWA - A507 - 85: 6 inch ~ 48 inch ball valve

Various possible International ISO Standard of Valves are mentioned below:

ISO 4411: Second Edition 2008: Hydraulic fluid power 
ISO 5208: 2008 : Industrial valves-pressure test of valves
ISO 5209: 1977 : General purpose industrial valves
ISO 6264: 1998 : Pressure-relief valves — Mounting surfaces
ISO – 5752 – 88: Metal valves for use in flanged pipe systems
ISO – 5996 – 84: Cast iron gate valves
ISO – 6552 – 89:  Automatic steam traps
ISO – 6553 – 80: Automatic steam traps
ISO – 6554 – 80: Flanged automatic steam traps
ISO – 6704 – 89: Automatic steam traps —
ISO – 7121 – 86: Flanged steel ball valves
ISO – 7259 – 88: key-operated cast iron gate valves for underground use
ISO – 8233 – 88: Thermoplastics valves 
ISO/DIN5211 – 89: Partial rotary valve drive connection
ISO/DIN: Steel globe valve with bolted bonnet
ISO/DIN – 88: Valve fire test requirements
ISO/DIN10631 – 91: General-purpose metal butterfly valve
ISO – 8242 – 89: Polypropylene valve for pressure pipe basic size metric series

Various possible NF Standard of Valves are mentioned below:
E29 – 323 – 85: Industrial valve-Flange connection cast iron gate valve ISO P”10, 16 for ground facilities
E29 – 327 – 85: Industrial valve cast steel gate valve ISO PN16, 20, 25, 40, 50, 100
E29 – 328 – 89: E29 – 332 – 75
E29 – 332 – 75: Industrial valve copper alloy threaded connection gate valve PN10
E29 – 335 – 75: Industrial Valve Flange Connection Jacketed Stainless Steel Gate Valve Series P”6~ 160
E29 – 337 – 75: Industrial valve one ISO bar series, nominal pressure PN10-64 flange connection, jacket stainless steel gate valve
E29 – 358 – 87: Industrial valve-flange connection steel globe valve and lift check valve nominal pressure! “64 a 100
E29 – 371 – 84: Industrial valve-flange connection iron swing check valve ISO! “10, 16, 25, 40, 20FT, 50FT
E29 – 376 – 81: Industrial valve flange connection steel swing check valve! “100
E29 – 470 – 89: ndustrial valve-steel ball valve, specifications

Various possible ISA (International Society of Automation) Standard of Valves are mentioned below:
ISA 75.02.01: Control Valve Capacity Test Procedures
ISA 75.05.01: Control Valve Terminology
ISA 75.08.01: Face-to-Face Dimensions For Integral Flanged Globe-Style Control Valve Bodies
ISA 75.08.02: Face-to-Face Dimensions For Flangeless Control Valves
ISA 75.08.03: Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves
ISA 75.08.04: Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves
ISA 75.08.05: Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150, 300, 600, 900, 1500, and 2500)
ISA 75.08.06: Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)
ISA 75.08.07: Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
ISA 75.08.08: Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300, and 600)
ISA 75.08.09: Face-To-Face Dimensions For Sliding Stem Flangeless Control Valves (Classes 150, 300, And 600)
ISA 75.10.01: General Requirements for Clamp or Pinch Valves
ISA 75.10.02: Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)
ISA 75.11.01: Inherent Flow Characteristic and Rangeability of Control Valves
ISA 75.13.01: Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output
ISA 75.19: Hydrostatic Testing of Control Valves
ISA 75.02: Hydrostatic Testing of Control Valves
ISA RP75.06: Control Valve Manifold Designs, Recommended Practice

Various possible EEMUA (Engineering Equipment and Materials Users Association) Standard of Valves are mentioned below:
EEMUA-182: Specification for Integral Block & Bleed Valve Manifolds for Direct Connection To Pipe

Various possible China GB Standard of Valves are mentioned below:
GB12220: General valve – marking
GB12221: Flanged ends metal valve – face-to-face dimensions
GB12222: Multi-turn valve – the connection of the driving device
GB12223: Part-turn valve – the connection of the driving device
GB12224: Steel valve – general requirements
GB12225: General valve – copper alloy casting ware technology requirements
GB12226: General valve – gray casting iron technology requirements
GB12228: General valve – carbon forging steel technology requirements
GB12229: General valve – carbon casting steel technology requirements
GB12230: General valve – Ao casting steel technology requirements
GB12232: General valve – flanged ends iron gate valve
GB12233: General valve – iron gate valve and lift check valve
GB12234: General valve – flanged and butt-welding ends copper gate valve
GB12237: General valve – flanged and butt-welding ends steel ball valve
GB12238: General valve – flanged and wafer ends butterfly valve
GB12239: General valve – diaphragm valve
GB12240: General valve – iron plug valve
GB12241: Safety valve – general requirements
GB12242: Safety valve – characteristic testing solution
GB12243: Direct spring-loaded safety valve
GB12244: Pressure reducing valve – general requirements
GB12245: Pressure reducing valve – characteristic testing solution
GB12246: Pilot operated pressure reducing valve
GB12247: Steam trap valve – classification
GB12248: Steam trap valve – technology terms
GB12249: Steam trap valve – marking
GB12250: Steam trap valve – face-to-face dimensions
GB12251: Steam trap valve – testing solution
GB/T13927: General valve – pressure testing
GB12220: General valve –  marking
GB12221: Flanged ends metal valve – face-to-face dimensions
GB12222: Multi-turn valve –  connection of the driving device
GB12223: Part-turn valve –  connection of the driving device
GB12224: Steel valve – general requirements
GB12225: General valve –  copper alloy casting ware technology requirements
GB12226: General valve –  gray casting iron technology requirements
GB12227: General valve –  ductile casting iron technology requirements
GB12228: General valve –  carbon forging steel technology requirements
GB12229: General valve –  carbon casting steel technology requirements
GB12230: General valve –  a casting steel technology requirements
GB12232: General valve –  flanged ends iron gate valve
GB12233: General valve –  iron gate valve and lift check valve
GB12234: General valve –  flanged and butt-welding ends copper gate valve
GB12235: General valve –  flanged steel stop and lift check valve
GB12236: General valve –  steel swing check valve
GB12237: General valve –  flanged and butt-welding ends steel ball valve
GB12238: General valve –  flanged and wafer ends butterfly valve
GB12239: General valve –  diaphragm valve
GB12240: General valve –  iron plug valve
GB12241: Safety valve –  general requirements
GB12242: Safety valve –  characteristic testing solution
GB12243: Direct spring-loaded safety valve
GB12244: Pressure reducing valve – general requirements
GB12245: Pressure reducing valve – characteristic testing solution
GB12246: Pilot operated pressure reducing valve
GB12247: Steam trap valve –  classification
GB12248: Steam trap valve –  technology terms
GB12249: Steam trap valve –  marking
GB12250: Steam trap valve –  face-to-face dimensions
GB12251: Steam trap valve –  testing solution
GB/T13927: General valve –  pressure testing
GB/T13932: General valve –  iron swing check valve
GB/T15185: Iron and copper ball valve
GB/T15188.1: Valve face-to-face dimensions –  butt-welding ends valve
GB/T15188.2: Valve face-to-face dimensions –  wafer ends valve
GB/T15188.3: Valve face-to-face dimensions –  female screw-down valve
GB/T15188.4: Valve face-to-face dimensions –  male screw-down valve

Corporate Information

Supply Location

world-map

We can supply or export all over the globe even small quantities by courier/air mode for fastest delivery.

Give us a try. Will transform into life long customer.

Products

Angle, channel, beam, gasket, filter, silencers, valve, flange, fitting, pipe, tube, tubing, plate, sheet, coil, foil, shim, strip, circle, flat, fastener, stud or threaded rod, bolt, nut, washer, screw, rivet, retaining ring, cir-clip, pin, spring, insert, standoff, forgings, machined parts or components, filler wire, etc.