German DIN Fastener- Hot, Cold, Warm, OpenDie, Upset Forged, Imperial, Metric, Coated, Plated, Phosphated

Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are leading German DIN Standard Fastener supplier, exporter, trader, wholesaler, stockiest, dealer, distributor, stock holder.

• General detail on German DIN Fastener
• Different Thread Types
• Different Other Standards
• Different Forging Types
• Different Plating Types
• Different Coating Types
• Different Phosphating Types
• Manufacturing Route
• Material & Steel Grades
• Various German DIN Standards for Fasteners
• Different Target Locations

German DIN Standard Fasteners such as stud or threaded rods, bolts, nuts, washers, screws, rivets, retaining rings, cir-clips, dowel pins, inserts, etc can be offer from ready stock or customized make to order basis depending on size in metric or imperial, type of threading as per UNC(Unified National Coarse Threads), 8UN (Constant Pitch), UNF(Unified National Fine Threads), UNEF(Unified National Extra Fine), British Standard Whitworthy(BSW or WW), British Standard Fine(BSF), ISO Metric Screw Thread, UNJC, UNJF, UNJEF, UNR, UNK, forged as hot, cold, warm, open-die, electrical upsetting, upset forging, type of coating as per Hot Dip Galvanising (HDG), Blackodize or chemical black, Black Japaned, Copper Coating, Light Bronze Antique, Dark Florentine Bronze, Organic, Zinc Flake, Dacromet, Geomet, PTFE, Teflon Coating, XYLAN Coating, Anodise, type of plating as per Self Colour, Plain Finish, Nickel, Zinc, Mechanical Zinc, Electro-plated Zinc, White Zinc, Yellow Zinc, Trivalent Blue Zinc, Black Zinc, Zinc Cobalt, Brass, Tin, Cadmium, Chromium, Chromate Passivation, Hexavalent Chromium Passivation, Trivalent Chromium Passivation, type of phosphate as per Zinc, Manganese.

Different types of Threading for German DIN Standard Fastener: ISO Metric Screw Thread, UNJC, UNJF, UNJEF, UNR, UNK Threads, Constant Pitch Thread (8UN), UNC(Unified National Coarse Threads), UNF(Unified National Fine Threads), UNEF(Unified National Extra Fine), BSW or WW (British Standard Whit-worthy), BSF (British Standard Fine)

Other types of fastener Standards: Indian IS, American Society of Mechanical Engineers ASME, Society of Automotive Engineers SAE, British BS, European EU, Italian UNI, Czechia CSN, Poland PN, International ISO, Industrial Fastener Institute IFI

Different kinds of forging for German DIN Standard Fastener: Hot Forging, Cold Forging, Warm Forging, Open-Die Forging, Electrical Upsetting, Upset Forging

Different types of plating for German DIN Standard Fastener: Self Colour, Plain Finish, Nickel, Zinc, Mechanical Zinc, Electro-plated Zinc, White Zinc, Yellow Zinc, Trivalent Blue Zinc, Black Zinc, Zinc Cobalt, Brass, Tin, Cadmium, Chromium, Chromate Passivation, Hexavalent Chromium Passivation, Trivalent Chromium Passivation

Different types of coating for German DIN Standard Fastener: Hot Dip Galvanising (HDG), Blackodize or chemical black, Black Japaned, Copper Coating, Light Bronze Antique, Dark Florentine Bronze, Organic, Zinc Flake, Dacromet, Geomet, PTFE, Teflon Coating, XYLAN Coating, Anodise

Different types of phosphates for German DIN Standard Fastener: Zinc, Manganese

Types for German DIN Standard Fastener & accessories: Stud or Threaded Rod, Bolt, Nut, Washer, Screw, Rivet, Retaining Ring, Cir-clip, Pin, Inserts, Spacers, Standoffs, Springs, etc.

*Note: We can provide testing certificate of German DIN Standard Fastener raw material steel bars which can be tested as per NACE MR-0175 for following: Chemical Analysis, Tensile Test, Hardness Test, Impact Test, Ferrite Test(E562), SSCC Test @ 24°C, SSCC Test @ 90°C, CSCC Test for 500hrs, G 48A Test for 72hrs, G 48B Test for 24hrs.

German DIN Standard Rolled Bars Manufacturing Process Route For Fasteners Raw Material: 

German DIN Standard Forged Bars Manufacturing Process Route For Fasteners Raw Material:

Client can procure smaller quantities of German DIN Standard Fastener Hardware online ready stock from us at any destination by just sending us an email at This email address is being protected from spambots. You need JavaScript enabled to view it.

Different types of steel material & grades for German DIN fastener: Mild Steel (MS), Carbon Steel (CS), Low Carbon Steel, Medium Carbon Steel, High Carbon Steel, Alloy Steel, Chromium, Chrome Vanadium, Molybdenum Bearing Steel, Cr-Mo Steel(Oil & Gas), Ni-Cr-Mo Steel, Ni-Mo Steel, Engineering Steel (EN Series), Nickel Chromium, Spring Steel(Silicon Manganese), Case-Hardening Steel, Nitriding Steel, Stainless Steel (SS), Austenitic Steel, Ferritic Steel, Martensitic Steel, Duplex Stainless Steel (DSS), Super Duplex Stainless Steel (SDSS), Precipitation Hardening Steel (pH), High Moly Stainless, Tool Steel, Hot Work Tool Steel, Cold Work Tool Steel, Oil Hardening Non Shrinking Tool Steel, Air-Hardening Tool Steel, High Carbon High Chromium (HCHCR), Shock Resisting Tool Steel, Water-Hardening Tool Steel, High Speed Steel (HSS), Plastic Mold Or Mould Steel, Hot Die Steel (HDS), Special Purpose Steel, Nitronic, Nimonic Steel, Invar, Super-Invar, Nilo, Inconel, Incoloy, Hastelloy, Monel, Titanium, Tantalum, Tungsten, Zirconium, Molybdenum, Copper, Copper Nickel, Beryllium Copper, Aluminium, Brass, Bronze, Copper Bronze, Phosphor Bronze, Silicon Bronze, Manganese Bronze, Tin Bronze, Aluminium Bronze, Nickel Aluminium Bronze, Silicon Aluminium Bronze, Nickel, Nickel Cobalt Alloy, Nickel Copper Alloy, Nickel Silver, Cobalt Alloy, Stellite, Maraging Steel, Mar-M, Rene, Udimet, Waspalloy, Hiperco Alloy, Elgiloy, UMCo, Sanicro, Casting Steel, Teflon, PTFE, Nylon

Various German DIN standard stud or threaded rods, bolts, nuts, washers, screws, rivets, retaining rings, cir-clips, dowel pins, inserts, etc.

DIN 1: Taper Pins
DIN 1052: Washers for wood constructions
DIN 11014: Plough bolts with 2 nibs with nuts
DIN 11024 D: Spring cotters of a Bolts
DIN 11024 E: Spring cotters of a Bolts
DIN 124: Round Head Rivets
DIN 125 A: Plain washers Type A
DIN 125 B: Plain washers, Type B
DIN 125: Plain Washers
DIN 126: Plain washers
DIN 127 A: Spring lock washers, Form A
DIN 127 B: Spring lock washers, Form B
DIN 128 A: Split Spring Washers, Curved, Form A
DIN 128 B: Split Spring Washers, Waved Form B
DIN 137 A: Spring washers curved, Form A
DIN 137 B: Spring Wave Washers, Form B
DIN 1433: Clevis Pins without Head
DIN 1440: Medium type washers for pins
DIN 1441: Flat Washers For Clevis Pins, Coarse
DIN 1443: Clevis pins without head
DIN 1444: Clevis pins with head
DIN 1445: Clevis pins with head and stud end
DIN 1471: Grooved Pins, Full Length Taper-grooved
DIN 1472: Parallel Grooved Pins
DIN 1473: Cylindrical grooved pins
DIN 1474: Grooved pins full length parallel
DIN 1475: Grooved Pins, Third Length Centre-grooved
DIN 1476: Round Head Grooved Pins
DIN 1477: Countersunk Head Grooved Pins
DIN 1478 EE: Turnbuckles with 2 Eyes
DIN 1478 EH: Turnbuckles with Hook and Eye
DIN 1478 HH: Turnbuckles, forged (open form)
DIN 1478 JJ: Turnbuckles with 2 Jaws, forged (open form)
DIN 1478 SE: Turnbuckles with 2 Stub Ends
DIN 1478: Turnbuckles, forged (open form)
DIN 1479: Hexagonal turnbuckle
DIN 1480 EE: Turnbuckles with 2 Eyes
DIN 1480 EH: Turnbuckles with Hook and Eye
DIN 1480 HH: Turnbuckles, forged (open form)
DIN 1480 JJ: Turnbuckles with 2 Jaws, forged (open form)
DIN 1480 PP: Turnbuckles with plane ends, forged (open form)
DIN 1480 SE: Turnbuckles with 2 Stub Ends
DIN 1480: Turnbuckles, forged (open form)
DIN 1481: Spring-Type Straight Pins (Roll Pins) - Heavy Type
DIN 15237: Plate screws
DIN 15315: Rope Sockets
DIN 1587: Hexagon domed cap nuts
DIN 1804: Slotted round nuts for hook spanners
DIN 1816: Round Nut with Set Pin Holes Inside
DIN 186: T-Head bolts with square neck Head
DIN 188: T-Head Bolts With Double Nip
DIN 2093: Disc Spring Washer
DIN 22424 A: Triangle head bolts
DIN 22424 B: Triangle head bolts
DIN 22424 C: Triangle head bolts
DIN 2509: Double End Studs
DIN 2510 Type K: Reduced / Waisted Shank Stud Bolts with Short Threads
DIN 2510 Type KU: Reduced / Waisted Shank Stud Bolts with Short Threads and Spacer
DIN 2510 Type L: Reduced / Waisted Shank Stud Botls with Long Threads
DIN 2510 Type NF: Hexagon Nuts for Reduced / Waisted Shank Stud Bolts
DIN 2510 Type Z: Reduced / Waisted Shank Stud Bolts with Long Threads
DIN 2510 Type ZU: Reduced / Waisted Shank Stud Bolts with Long Threads and Spacer
DIN 2510: Reduced / Waisted Shank Stud Bolts, Hexagon Nuts and Sleeves for Bolted Connections in Petrochemical Industry
DIN 2510-7: Sleeves for use with Reduced / Waisted Shank Stud Bolts.
DIN 25193: Screw clamp with a large rounded head
DIN 258: Taper pins with external thread
DIN 261: T-head bolts
DIN 28129: Clamp nuts for covers
DIN 3017: Hose Clamps
DIN 302: Countersunk Head Rivets
DIN 314: Wing nuts with edged wings
DIN 315 A: Wing nuts with rectangular wings
DIN 315 D: Wing nuts with rounded wings
DIN 316 A: Wing screws with rectangular wings
DIN 316 D: Wing screws with rounded wings
DIN 319: Ball knobs
DIN 32501: Screw with metric thread
DIN 3404: Button head grease nipples
DIN 3570: U-bolts
DIN 39: Handles fixed
DIN 404: Slotted capstan screws
DIN 417: Slotted set screws and pins
DIN 427: Slotted headless screws with flat point
DIN 431: Hexagon pipe nuts
DIN 43148: Rope suspensions with wedge sockets
DIN 432: External tab
DIN 433: Washers for cheese head screws
DIN 434: Square taper washers for U-sections
DIN 435: Square taper washers for I-sections
DIN 436: Square Washers for wood constructions
DIN 438: Slotted set screws with cup point
DIN 439 A: Hexagon thin nuts. unchamfered
DIN 439 B: Hexagon thin nuts. chamfered
DIN 439: Hexagon Thin Nuts (Jam Nuts)
DIN 440 R: Large size flat washers with round hole for use in timber constructions
DIN 440 V: Large size flat washers with square hole for use in timber constructions
DIN 440: Washers for use in timber constructions
DIN 443: Sealing push-in caps (Cover Plates)
DIN 444: Eyebolts
DIN 444A: Eye Bolts Type A
DIN 444B: Eye Bolts Type B
DIN 462: Retaining plate with internal nose
DIN 463: Tab Washers With Long And Short Tab
DIN 464: Knurled thumb screws, high type
DIN 465: Knurled thumb screws
DIN 466: Knurled nuts, high type
DIN 467: Knurled nuts, low type
DIN 470: Sealing washer
DIN 471: Retaining rings for shafts
DIN 472: Retaining rings for bores
DIN 478: Square Head Bolts with collar
DIN 479: Square head bolts with short dog point
DIN 480: Square head bolts with collar and tip approach
DIN 508: Nuts for T-slots
DIN 525: Welding studs
DIN 529 A: Anchor Bolts (Stone Bolt)
DIN 529 B: Anchor Bolts (Stone Bolt)
DIN 529 C: Anchor Bolts (Stone Bolt)
DIN 529 D: Anchor Bolts (Stone Bolt)
DIN 529 E: Anchor Bolts (Stone Bolt)
DIN 529 F: Anchor Bolts (Stone Bolt)
DIN 529 G: Anchor Bolts (Stone Bolt)
DIN 529: Anchor Bolts (Stone Bolt)
DIN 5406: Tab washers for nuts to DIN 981
DIN 546: Slotted Round Nut
DIN 547: Two-hole nuts
DIN 548: Round nuts with set pin holes in side
DIN 551: Slotted set screws
DIN 553: Slotted set screws with cone point
DIN 555: Hexagon Nuts, production class C
DIN 557: Square Nuts
DIN 558: Hexagonal screws, production class C
DIN 561 A: Hexagon head screws with small hexagon and dog point - steel
DIN 561 B: Hexagon head screws with small hexagon and dog point - steel
DIN 562: Square thin nuts
DIN 564 A: Hexagon set screws with cone point
DIN 564 B: Ejector screw with hexagonal head and a tapered end
DIN 571: Hex wood screws
DIN 580: Lifting Eye Bolts (Collar eyebolts for lifting purposes)
DIN 582: Lifting Eye Nuts
DIN 5914: Sleeper Screws
DIN 601: Hexagon head bolts with nut, production class C
DIN 603: Mushroom head square neck bolts
DIN 604: Flat countersunk nib bolts with hexagon nut
DIN 605: Flat countersunk square neck bolts with hexagon nut
DIN 607: Half coach Bolts
DIN 608: Flat countersunk square neck bolts (with short square neck)
DIN 609: Hexagon fits bolts with long thread
DIN 610: Hexagon fit bolts with short threaded portion
DIN 6319: Spherical washers
DIN 6325: Dowel Pins
DIN 6330: Hexagon nuts height 1.5 xD
DIN 6331: Hexagon nuts with collar height 1.5 x D
DIN 6332: Grub screws with thrust point
DIN 6334: Hexagon Nuts - 3D
DIN 6335 D: Cross handles Form D with through holes
DIN 6335 K: Cross Handles form K with threaded bush
DIN 6336 D: Star knobs Form D with through holes
DIN 6336 K: Star knobs form K with threaded bush
DIN 6340: Washers for clamping devices
DIN 653: Flat Knurled Thumb Screws
DIN 660: Round Head Rivets
DIN 661: Countersunk Head Rivets
DIN 662: Head rivets (rivets sheet)
DIN 674: Flat round head rivets
DIN 675: Countersunk Head Rivets
DIN 6796: Conical spring washer for bolted connections
DIN 6797 A: Toothed lock washers, external form A
DIN 6797 J: Toothed lock washers, internal Form J
DIN 6797 V: Toothed lock washers, conical V
DIN 6798 A: Serrated lock washers, Forma I - external
DIN 6798 J: Serrated lock washers, Form J - internal
DIN 6798 V: Serrated lock washers, V - conical
DIN 6799: Retaining washers for shafts
DIN 6885 A: Parallel keys high type
DIN 6887: Taper keys gip head
DIN 6888: Disc springs
DIN 6899: Thimbles
DIN 6912: Cap screws thin cylindrical head
DIN 6913: Spring Lock Washers With Safety Rings
DIN 6914: High-strength injection structural bolts
DIN 6915: Hexagon nuts with large widths across flats for high-voltage connections
DIN 6916: Slices, round, for HV connections
DIN 6917: Square taper washers for I-sections
DIN 6918: Square taper washers for U-sections
DIN 6921: Hexagon flange bolts metric
DIN 6923: Hexagon nuts with flange
DIN 6924: Hexagon nuts with Klamm part, non-metallic insert
DIN 6925: Hexagon nuts with clamping part all-metal nuts,
DIN 6926: Hexagon flange lock nuts
DIN 6927: Nut self-locking with Collar
DIN 7: Dowel Pins
DIN 703: Collars heavy series
DIN 705 A: Adjusting rings with set screw, Form A
DIN 705 B: Adjusting rings with set screw, Form B
DIN 70613: Hexagon bolts with small widths across flats
DIN 70614: Hexagon bolts with small widths across flats full thread
DIN 70852: Lock-nuts
DIN 70952: Tab washers for slotted nut to DIN 70852
DIN 71412 A: Taper type grease nipples, short m. Allen, A = cone head straight / axial
DIN 71412 B: Taper type grease nipples, short, B = cone-head, 45 degree angled
DIN 71412 C: Angled taper type lubrication nipples, short, C = cone-head, 90 degree
DIN 71752: Fork joint
DIN 71802: Angled ball joints
DIN 7337: Break mandrel blind rivets
DIN 7338: Rivets for brake linings and clutch linings
DIN 7340: Tubular rivets
DIN 7343: Spiral-span pins, rule execution
DIN 7344: Spiral dowel pins, heavy duty
DIN 7346: Dowel pins, light version
DIN 7349: Washers for bolts with heavy clamping sleeves
DIN 741: Wire rope clips
DIN 74361 A: Spherical collar nuts form A
DIN 74361 B: Flat collar nuts form B
DIN 74361 C: Taper flange nuts, lock washers C (lock washers)
DIN 7500 C: Thread forming screws with cross recessed raised cheese head Z
DIN 7500 CTX: Thread forming screws with hexagon head
DIN 7500 D: Thread forming screws for hexagon head
DIN 7500 E: Thread forming screws with hexagon head
DIN 7500 M: Thread forming screws for metric ISO threads
DIN 7500 MTX: Thread forming screws with hexagon head
DIN 7504 K: Drilling screws hex
DIN 7504 N: Self Drilling screws
DIN 7504 NSQ: Self Drilling screws
DIN 7504 NTX: Self Drilling screws
DIN 7504 O: Self Drilling screws
DIN 7504 OTX: Self Drilling screws
DIN 7504 P: Self Drilling screws
DIN 7504 PSQ: Self Drilling screws
DIN 7504 PTX: Self Drilling screws
DIN 7513 A: Hex tapping screws A = with hexagon head
DIN 7513 B: Hex tapping screws B = with cylinder head and slot
DIN 7513 F: Hex tapping screws countersunk head with slot F
DIN 7513 G: Hex tapping screws G = with Raised and slot
DIN 7516 A: Self-Tapping Thread Cutting Screw with Phillips, Form A
DIN 7516 ATX: Self-Tapping Thread Cutting Screw with TORX, Form A
DIN 7516 D: Self-Tapping Thread Cutting Screw whit flat head with Phillips, Form D
DIN 7516 DTX: Self-Tapping Thread Cutting Screw whit flat head with TORX, Form D
DIN 7516 E: Self-tapping screws raised countersunk Phillips, Form E
DIN 7516 ETX: Self-tapping screws raised countersunk TORX, Form E
DIN 7603 A: Sealing rings
DIN 7604 A: Hexagon head pipe plug, cylindrical thread
DIN 7604 C: Screw plugs with collar and external hexagon
DIN 7643: Hollow screws
DIN 766: Round steel link chains
DIN 787: Bolts and screws for T-slots
DIN 792: Cylindrical countersunk screws
DIN 7965: Slotted inserts
DIN 7967: Self-locking counter nuts PAL
DIN 7968: Hexagon fit bolts with hexagon nut for steel structures
DIN 7969: Slotted countersunk head bolts for structural steel bolting
DIN 797: Special foundation bolts
DIN 7971: Tapping screws, slotted pan head
DIN 7972: Slotted countersunk head tapping screws
DIN 7973: Slotted raised countersunk head tapping screws
DIN 7976: Hexagon head self tapping screws
DIN 7977: Taper pins with external thread
DIN 7978: Taper pins with internal thread
DIN 7979: Parallel Pins with Internal Thread
DIN 798: Special foundation square nuts
DIN 7980: Spring lock washer for cylinder head screws
DIN 7981 C: Pan head tapping screws with cross recess H and Z, Form C
DIN 7981 CTX: Pan head tapping screws with TORX, Form C
DIN 7981 F: Pan head tapping screws with cross recess H and Z, Form F
DIN 7982 C: Cross recessed countersunk head tapping screws, Form C
DIN 7982 CTX: Countersunk head tapping screws with TORX, Form C
DIN 7982 F: Cross recessed countersunk head tapping screws, Form F
DIN 7983 C: Countersunk (Flat) Head Tapping Screws with Cross Recess, Form C
DIN 7983 F: Countersunk (Flat) Head Tapping Screws with Cross Recess, Form F
DIN 7983 TX: Countersunk (Flat) Head Tapping Screws with TORX, Form C
DIN 7984 TX: Thin head cap screws with TORX
DIN 7984: Hexagon socket thin head cap screws
DIN 7985 PZ: Fillister head Screw with PZ cross slot
DIN 7985 TX: Lens screws with TORX
DIN 7985: Cross recessed raised cheese head screws
DIN 7989: Washers for steel constructions
DIN 7990: Hexagon head bolts for steel structures
DIN 7991 TX: Hexagon socket countersunk head cap screws
DIN 7991: Hexagon socket countersunk head cap screws
DIN 7992: T-head bolts with large head
DIN 7993 A: Snap rings
DIN 7993 B: Internal Snap Ring
DIN 7995: Cross recessed countersunk (oval) head
DIN 7996: Cross recessed pan head wood screws
DIN 7997: Cross recessed countersunk (flat) head
DIN 7999: High strength hex. fit bolts with large width across flats for stuctural steel bolting - nuts and washers
DIN 80705: Thin nuts with fine pitch thread and with small widths across flats
DIN 8140 A: Threaded inserts, type A standard thread
DIN 8140 B: Threaded Inserts, Self-Locking Type B
DIN 835: Double End Studs
DIN 84: Slotted cheese head screws
DIN 85: Slotted pan head screws
DIN 9021: Plain washer, outer diameter about 3 d
DIN 906: Locking screws with hexagon socket, taper thread
DIN 908: Screw plugs with collar and hexagon socket, cylindrical thread
DIN 909: Hexagon head pipe plug whit conical pipe thread
DIN 910: Screw plugs with collar and outer hexagon, cylindrical thread
DIN 911: Hex key
DIN 912 BL: Sheet metal screws with hexagon socket
DIN 912 TX: TORX socket Head Cap Screws
DIN 912 VG: Hexagon socket Head Cap Screws full thread
DIN 912: Hexagon socket Head Cap Screws
DIN 913: Hexagon socket set screws with flat point
DIN 914: Hexagon socket set screws with cone point
DIN 915: Hexagon socket set screws with full dog point
DIN 916: Hexagon socket set screws with cup point
DIN 917: Hexagon Cup Nuts - Low Pattern
DIN 920: Slotted Pan Head Screws, Small Head
DIN 921: Slotted pan head screws with large head
DIN 922: Slotted pan head screws with small head and full dog point
DIN 923: Slotted pan head screws with shoulder
DIN 924: Slotted Raised Countersunk Head Screws with Dog Point
DIN 926: Slotted set screws with full point
DIN 927: Slotted Shoulder Screws
DIN 928: Square Weld Nuts
DIN 929: Hexagon weld nuts
DIN 93: Slices with a cloth (lock washers)
DIN 931: Hexagon head bolts with shank
DIN 933 SZ: Hexagon bolts with slot
DIN 933: Hexagon head bolts with thread up to head
DIN 934: Hexagon nuts with metric coarse and fine pitch thread
DIN 935: Hexagon slotted castle nuts
DIN 936: Hex nuts, low type
DIN 937: Castle nuts, low form
DIN 938: Studs with engagement length 1 x d
DIN 939: Studs, with engagement length 1.25 x d
DIN 94: Split pins
DIN 940: Studs, with engagement length 2,5 x d
DIN 95: Slotted oval head wood screws
DIN 96: Slotted Round Head Wood Screws
DIN 960: Partially Threaded Hex Cap Screw (Fine Thread)
DIN 961: Hex Cap Screws, Metric Fine Thread - Full Thread
DIN 963: Slotted countersunk head screws
DIN 964: Slotted raised countersunk oval head screws
DIN 965 TX: Countersunk screws with TORX
DIN 965: Cross recessed countersunk flat head screws
DIN 966: Cross recessed raised countersunk head screws
DIN 967: Cross recessed pan head screws with collar
DIN 97: Slotted Flat Head Wood Screws
DIN 975 TR: Threaded rods, trapezoidal thread
DIN 975: Threaded rods
DIN 976 TR: Threaded rods with trapezoidal thread
DIN 976: Metric thread stud bolts
DIN 976-1 A: Fully Threaded Stud Bolts with RL type thread end as in DIN EN ISO 4753
DIN 976-1 B: Fully Threaded Stud Bolts with CH type thread end as in DIN EN ISO 4753
DIN 977: Hexagon weld nuts with flange
DIN 979: Hex thin slotted and castle nuts-coarse and fine pitch thread
DIN 98: Handles, rotatable
DIN 980-980v: Hexagon nuts with clamping part, all metal nut
DIN 981: Locknuts, KM Series
DIN 982: Prevailing torque nuts with nonmetalic insert
DIN 983: External retaining rings with lugs
DIN 984: Internal retaining rings with lugs
DIN 985: Prevailing torque type hexagon thin nuts with nonmetallic insert
DIN 986: Prevailing torque hexagon domed nuts with non-metallic insert
DIN 988: Shim rings and supporting rings
DIN 99: Clamping Levers

 Jayant Impex Pvt Ltd, India, Maharashtra, Khopoli, Mumbai are looking to explore its supply of German DIN Standard Fastener from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island, Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d'Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russia Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, Ladakh, etc.